Shenzhen Sunwin E-Commerce Co., Ltd.
Main products:DSLR Follow Focus,PLC Programing Cable,CNC Break Broad,HDMI Video Converter Card,5 Axis Stepper Motor Driver Board
Products
Contact Us
  • Contact Person : Mr. Pang Derek
  • Company Name : Shenzhen Sunwin E-Commerce Co., Ltd.
  • Tel : 86-0755-27213083
  • Fax : 86-0755-27213083
  • Address : Guangdong,Shenzhen,Room1318, Jiangshi Building, Xintian Street, Fuyong District, Bao'an
  • Country/Region : China
  • Zip : 518103

ESD Safe Surface Resistivity Tester Indicator Kit

ESD Safe Surface Resistivity Tester Indicator Kit
Product Detailed
ESD Safe Surface Resistivity Tester/Indicator Kit (Similar to ACL 385)
Specifications:

Test Voltage & Current: Nominal 9 volts and 0.006 µA to 1.0 mA

Power: One (1) standard 9-volt batteryElectrodes: 2 each Machined Brass, One (1) Square Resistivity configurationOverall Accuracy: ± 10%Changeover Point: Based on measured resistance; ± 1/2 decade on logarithmic scale (i.e., 3.16 x 10n)Changeover Point Accuracy:± 1/2 decadeResolution: One order of magnitude

LED Measurement Indications:11 LED's with Dual scales:103 to 1012 Ohms/square per ASTM 257 in one decade increments102 to 1011 Ohms per S-11.11 in one decade incrementsOver range indicator light for "Insulative" surfaces, i.e., >1012 Ohms/square or >1011 Ohms.Auxiliary Connections: 2 each female banana for resistance range performance verification and direct point to point resistance measurements without electrodes.1 each Point to Ground Phono Receptacle for resistance measurements using one electrode1 each Electrode cut off switchOperation Control: One (1) PUSH to TEST ButtonOperating Range: 40ºF to 120ºF (5ºC to 49ºC)Storage Temp: -15ºC to 60ºC (5ºF to 140ºF), Relative Humidity: 0% to 90%Battery Life: 40 hours typical Dimensions: 115 mm x 69 mm x 26 mmWeight: 6 oz.

 

Surface Resistivity Range:

103 TO >1012 OHMS/SQUARE

Resistance-to-Ground: 

103 TO >1012 OHMS ;

 

LED measurement indictor

Resolution of one (1) order of magnitude.

Includes two (2) each machined brass, one (1) square resistivity configuration.

Two (2) each female banana receptacles for performance verification and direct point-to-point resistance measurements using auxiliary electrodes or probes (not included).

One (1) PUSH to TEST button.

Battery operated (1 x 9 Volts

Indicated in Ohms & Ohms/Square.

 

Includes:

1) Battery,

2) Ground Jack;

ESD Safe Surface Resistivity Tester Indicator Kit



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.